Door and window repairs in Canberra

A door that sticks, a loose handle, a blind that needs adjusting or a damaged flyscreen frustrates you every day. We help with minor repairs and fittings around your home.

Get the everyday fittings working properly again

Doors and windows take the brunt of daily use. A sticking door, a loose door handle, or a flyscreen that no longer closes properly creates frustration that builds up fast. We handle door repair and sliding door repair work across Canberra, making adjustments and replacements that get things working smoothly again. Flyscreen repair is straightforward when the mesh tears or the frame warps. A number of years of hands-on experience means most jobs are sorted without fuss. Covered by public liability insurance and backed by a 30-day workmanship guarantee.

Doors, drawers, handles and hinges get a lot of use. Small problems can quickly become an inconvenience, but practical adjustments can often make a space easier to use again.

We can also help with blind adjustments, flyscreen repairs and minor window maintenance. Describe what needs attention when you request a quote and we will confirm the suitable scope.

  • Door & drawer adjustments
  • Handles, hinges and blind adjustments
  • Flyscreen repairs and minor window maintenance

Door handle repair and cupboard door adjustment

A door handle that has worked loose, spins or no longer latches properly can be tightened or replaced. We can fit a new handle to a door frame where the old one has failed. Cupboard doors that will not close or hang straight can be adjusted at the hinges so the door sits level again. Send a photo of the handle or the cupboard door and a short note about what it is doing so we can take a look on site.

Have a door, window or fitting that needs attention? Request a quote.

A bright interior with doors and windows
  • Covered by public liability insurance
  • 30-day workmanship guarantee
  • National Police Check
  • No call-out fee within the normal Canberra service area

Sliding door repair in Canberra

Grit in the track or worn rollers can make a sliding door stick, drag or jump. We clean and realign the track, replace worn rollers and adjust the door height. Describe the problem when you request a quote so we can confirm the suitable repair.

Door repair and sliding door maintenance in Canberra

A door that rubs, drags or catches on the floor

Doors start catching when a house settles, when hinges loosen, or when timber takes on moisture and swells. A few turns on the hinge screws, a hinge swap or a light trim along the edge usually sorts it. Catching early matters: a door dragging on carpet or tiles puts strain on the frame and the fix gets bigger.

A door that will not latch or stay shut

When a door stops latching it has usually sagged slightly, or the strike plate on the frame has moved out of line. Adjusting the hinge position and the strike plate normally brings the latch back into place, so the door closes and holds without being pushed.

Draughts, rattles and loose fittings

Handles that turn loosely, hinges that have worked themselves out of the timber, a door that rattles in its frame, or a gap letting cold air through in winter. Weather seals, door stops and hardware adjustments are small jobs that make a room feel properly finished.

Door and window repair questions

What causes a sliding door to get stuck or hard to open?

Dirt and debris collect in the track over time and the rollers wear down from constant use. The frame can also shift slightly, throwing the door out of square. Cleaning tracks and lubricating properly restores smooth operation. Adjustments to the frame may be needed if the door has moved out of alignment.

Can you replace just the flyscreen mesh, or do I need a new frame?

Usually just the mesh needs replacing. The work involves removing the old mesh, cleaning the frame and fitting new mesh that’s pulled tight and stapled down. If the frame itself is bent or damaged, replacement makes more sense. We assess what you have and recommend the right fix.

Why is my sliding door so hard to push?

Almost always a track or roller problem. Grit builds up in the track and the rollers underneath lose their shape or stop spinning, so the door drags along the metal instead of rolling. Cleaning the track and replacing the rollers usually restores smooth movement without touching the frame or the glass.

Can a door that rubs on the floor be fixed without replacing it?

Yes, in most cases. A door usually rubs because the hinges have loosened or the house has settled a little. Tightening or replacing the hinge screws, adjusting the hinges, or trimming a small amount off the bottom edge gives the clearance back for carpet or tiles.

Why has my door stopped latching?

A door that will not latch has normally moved slightly out of square, or the strike plate on the frame is no longer lined up with the latch. Adjusting the hinges and shifting the strike plate lets the latch sit back into the keeper. It is a small job that stops a door swinging open on its own.

Do you repair flyscreens and screen doors?

Yes. Sliding flyscreens and security screens use the same kind of track and roller setup as glass doors, so they need the same sort of attention to slide easily and latch properly against the frame. We also fit replacement screens and adjust screen door closers.

Let’s get your home odd jobs done.

Tell us what needs doing and we’ll come back to you with a quote and book at day and time that suits you.